The “INCREMENT” configuration is ideal for installation in plants that have reached their maximum operating capacity, to restore oxidation levels to those needed to complete the cycle.
The system is designed to be easily added while the plant is mid-operation, with very short installation times and without interrupting the cycle. The number of INCREMENT MODULES is calculated on the basis of the results required and can be finely adjusted to avoid waste. Once those results have been obtained, the modules can be removed just as easily and used elsewhere.
|General technical data|
|OUTPUT SURFACE AREA||3 diffusers 600 cm2|
|SURFACE AREA COVERED||0,18 m2|
|GAS PASSAGES||1500 cm2 chaotic|
|PASSAGE DIAMETER||20 Microns|
|MICROBUBBLE SIZE (DIAMETER)||0,75 – 1,2 mm|
|MICROBUBBLE SIZE STABILITY||0,1 – 8 bar|
|FLOW RATE||With suitable capacities over 16 m3/hour|
|CHEMICAL RESISTANCE OF RESIN||Strong acids, strong alkalis|
|CLEANING||External with high pressure cleaner, internal permeation|
|MAXIMUM TEMPERATURE||90 °C|
|TYPE||Modular structure; number of modules decided case-by-case|
|OPERATION||Flexible, with rapid large variations possible, ideal for automating parameter control.|